The Department of Housing & Urban Development (HUD) has announced the pending federal register publication of the Final Inspection Standards Notice for the National Standards for the Physical Inspection of Real Estate (NSPIRE). The notice details inspectable items at HUD-assisted and Multi-family insured properties. This includes a classification of the conditions that are considered life-threatening, severe, moderate, or low-risk by item and inspectable area. Additionally, the notice commits HUD to review standards at least every three years.
NSPIRE improves HUD’s oversight by aligning and consolidating inspection regulations used to evaluate HUD housing across multiple programs. NSPIRE strengthens HUD’s physical condition standards, formerly known as the Uniform Physical Condition Standards (UPCS) and the Housing Quality Standards (HQS). Effective October 1, 2023, UPCS and HQS will no longer exist.
The NSPIRE standards were tested during the NSPIRE Demonstration and were opened for public comment on June 17, 2022. The final standards were published with changes considering feedback HUD received and additional field testing during the NSPIRE Demonstration. Major changes include:
HUD published the final NSPIRE rule on May 11, 2023, that made changes to inspections for Public Housing and Multifamily Housing programs. In addition to the final rule, the Final Standards Notice is one of three core subordinate publications as part of NSPIRE; HUD will publish the two remaining notices - the final Scoring and Administrative Notices - this summer.
How NSPIRE Differs
The new NSPIRE scoring approach is very different from the ones used by REAC since 1999. As noted earlier, NSPIRE will formally align expectations of housing quality and consolidate inspection standards.
Currently, UPCS inspections are "risk-based" inspections. A risk-based inspection takes a sampling of results and determines what risk may be present on the entire property and the owner’s general operation. HQS inspections are results-based, and these standards are used to create a list of items that need to be corrected in order to participate in a HUD program (e.g., housing choice vouchers).
The updated NSPIRE inspection protocols seek to combine the aims of both approaches. It uses a "risk-based" approach of using results to encourage better day-to-day compliance and a "results-based" approach that aims to ensure the issues are corrected in a prompt manner. Also, NSPIRE inspection standards and scoring methodology reflect NSPIRE’s goals of focusing on the health and safety of residents over curb appeal and on life-threatening and severe deficiencies inside units resulting in more scoring impact than those outside the units.
Three Components of NSPIRE
NSPIRE is designed around three components that are intended to help accomplish HUD goals with the updated inspection program. The NSPIRE model provides for three inspection types, which include a self-inspection element to support owners and managers adopting year-round maintenance practices:
Inspectable Areas
Under UPCS, there are five inspectable areas. With NSPIRE, HUD establishes and consolidates the inspectable areas of a REAC inspection into three easily identifiable locations: Unit, Inside, and Outside.
Deficiency Categories
NSPIRE has abandoned the UPCS levels of deficiency (1-3, from least to most severe) in favor of a model that just identifies whether there is a specific deficiency or not. The severity is indicated by the overall category of deficiency. The majority of deficiencies are now considered health & safety deficiencies.
Health & Safety deficiencies have strict deadlines to correct and report as corrected to HUD. For severe health & safety deficiencies, an owner will have 24 hours to correct and 72 hours to report to HUD. For standard health and safety deficiencies, an owner will have 30 days to correct and 35 days to report the correction to HUD.
Proposed NSPIRE Scoring Format
The NSPIRE scoring methodology converts observed defects into a numerical score and is easier to understand than under UPCS.
HUD intends to continue using the zero to 100-point scale for purposes including (but not limited to):
Scoring Calculations
With the proposed scoring format, standards that are categorized as more severe will have a greater impact on a property’s score when the deficiencies are in a unit, and a property with observed health and safety defects in the units is more likely to fail an inspection than a comparable property with less severe defects.
As noted above, NSPIRE has three inspectable areas - Units/Inside/Outside. Within these three inspectable areas, there are four Defect Severity Categories: (1) Life-Threatening {most severe}; (2) Severe; (3) Moderate; and (4) Low {least severe}.
To determine a site’s score, for each of the categories, the number of deficiencies on an inspection will be multiplied by a HUD-provided multiplier and that value will be divided by the unit sample. The following example illustrates how the scoring will work:
It is important to note that while calculated scores are rounded to the nearest whole number in most cases, sites that score between 59 and 60 will always be rounded down to 59.
Fail Scores
There are two situations in which a site will be considered to have failed inspection. Failure to achieve a score at or above 60 is considered a failing score, and sites with a unit point deduction of 30 or more will fail - even if there are no other deductions for the Inside or Outside parts of the review.
Letter Grades
In order to improve the ease of understanding the meaning of the scores, HUD will assign a letter grade to each property inspection score.
Bottom Line
HUD’s expected actions for scores of 30 or less, or two successive scores under 60 will be specifically outlined in future HUD guidance. Severe consequences should be anticipated for any property falling into either of these categories. These standards represent a transformative step in improving the quality, safety, and livability of affordable housing in the United States. By expanding inspection criteria to include health and safety, promoting livability and accessibility, and implementing a standardized scoring system, NSPIRE is raising the bar for affordable housing providers. Owners and agents need to get ahead of the curve by ensuring that their properties are maintained on a regular basis - with particular emphasis on the condition of the units.
Subscribe to our news articles to stay up to date.
We care about the protection of your data. Read our Privacy Policy.